Starting from: $699

Specifications

  • Manufacturer: Honda
  • Model: Brush Cutters HHT35SUKCT
  • Type: Trimmers
  • Engine Type: Honda GX35, mini 4-stroke, OHC, single cylinder air-cooled multi-position (360°)
  • Honda Engine Model: GX35
  • Displacement: 35.8 cc (2.18 CID)
  • Bore & Stroke: 39 X 30 mm (1.5 X 1.2 in.)
  • Maximum Net Torque: 1.6 N.m (1.20 lbf-ft.) @ 5,500 RPM
  • Idle Speed: 3,100 ± 200 RPM
  • Max. No-Load RPM* (Requires Blade Barrier): 10,000 RPM
  • Ignition System: Transistorized flywheel magneto (electronic)
  • Spark Plug: CMR5H (NGK)
  • Cooling System: Forced air
  • Starting System: Recoil starter
  • Stopping System: Ignition primary circuit ground
  • Carburetor: Diaphragm type w/fuel pump
  • Recommended Fuel: Regular unleaded gasoline (87 Octane)
  • Fuel Primer: Anti-flood type
  • Fuel Capacity: 0.65 L (22.9 fl. Imp. oz.)
  • Fuel Consumption (approximate)**: 0.7 L/hr (0.15 Imp. gal./hr)
  • Clutch Drive Type: Centrifugal Twin Shoe-Clutch
  • Clutch Size: 78 mm (3.0625 in.) Diameter
  • Clutch Engagement: 4;200 ± 200 RPM
  • Air Cleaner: Semi-dry type
  • Lubrication System: Oil mist
  • Oil Capacity: 100 cc (3.52 fl. Imp. oz.)
  • Recommended Oil: SAE 10W30 API service classification SJ or later
  • Overall Length With Cutter Mounted: 190.5 cm (75 in.)
  • Overall Width: (handlebars) 60 cm (23.6 in.)
  • Overall Height: 40.5 cm (15.9 in.)
  • Dry Weight (Without Blade): 7 kg (15.4 lbs.)
  • Handle Type: U-shaped (bike type handle)
  • Throttle Control Type: Two-motion trigger type
  • Engine Stop Switch: Slide type switch
  • Cutting Head (Standard): Manual line feed nylon
  • Cutting Head (Optional): Semi-matic, pro-tap, semi-pro
  • Cutting Width: 43.2 cm (17 in.)
  • Line Type: Quiet LineTM
  • Cutting Line Diameter: 2.41 mm (0.095 in.) or 2.67 mm (0.105 in.)
  • Anti-Vibration System: Standard
  • Drive Shaft Type: Flexible steel cable
  • Final Drive Gear Case: Helical cut bevel gears / Sealed ball bearings
  • Gear Ratio: 1.235 Input shaft: 1 (Output Shaft)
  • Main Pipe Diameter: 25.4 mm (1 in.)
  • Main Pipe Thickness / Material: 1.5 mm (0.06 in.) / Aluminum
  • Trimmer Guard With Cutter: Standard
  • Steel Blade Guard: Standard
  • Shoulder Harness: n/a
  • Professional Double Loop Harness: Standard
  • Safety Goggles (A.N.S.I Std.): Standard