Starting from:
$539
Specifications
- Manufacturer: Honda
- Model: Trimmer Attachments UMC435LAC1
- Type: Trimmers
- Engine Type: Honda GX35, mini 4-stroke, OHC, single cylinder, air-cooled, multi-position (360°)
- Honda Engine Model: GX35T
- Displacement: 35.8 cc (2.18 CID)
- Bore & Stroke: 39 x 30 mm (1.5 x 1.2 in.)
- Maximum Net Torque: 1.6 N.m (1.20 lbf-ft.) @ 5,500 RPM
- Idle Speed: 3,100 ± 200 RPM
- Max. No-Load RPM: 10,000 RPM
- Ignition System: Transistorized magneto ignition (electronic)
- Spark Plug: CMR5H (NGK)
- Cooling System: Forced air
- Starting System: Recoil starter
- Stopping System: Ignition primary circuit ground
- Carburetor: Diaphragm type w/fuel pump
- Recommended Fuel: Regular unleaded gasoline (86 Octane or higher)
- Fuel Capacity: 0.63 L (22.2 fl. Imp. oz.)
- Clutch Drive Type: Centrifugal Twin Shoe-Clutch
- Clutch Size: 78 mm (3.0625 in.) Diameter
- Clutch Engagement: 4;200 ± 200 RPM
- Air Cleaner: Semi-dry type
- Lubrication System: Oil mist
- Oil Capacity: 100 cc (3.52 fl. Imp. oz.)
- Recommended Oil: SAE 10W30 API service classification SJ or later
- Overall Length (without attachment): 114.5 cm (45.1 in.)
- Overall Width: 32.0 cm (12.6 in.)
- Overall Height: 25.5 cm (10.0 in.)
- Dry Weight (without attachment): 6.0 kg (13.2 lbs.)
- Handle Type: Loop
- Throttle Control Type: Two-motion trigger type
- Engine Stop Switch: Slide type switch
- Drive Shaft Type: Rigid Steel
- Shaft Support: Rubber Mounted Bushings (4)
- Main Pipe Diameter: 26 mm (1.02 in.)
- Main Pipe Thickness / Material: 2 mm (0.08 in.) Aluminum
- Shoulder Harness: Standard
- Safety Goggles (A.N.S.I Std.): Standard
- Blade Barrier Kit: Standard