Starting from:
$429
Specifications
- Manufacturer: Honda
- Model: Trimmers HHT25SLTC
- Type: Trimmers
- Engine Type: Honda GX25, mini 4-stroke, OHC, single cylinder air-cooled multi-position (360°)
- Honda Engine Model: GX25
- Displacement: 25 cc (1.53 CID)
- Bore & Stroke: 35 X 26 mm (1.4 X 1 in.)
- Maximum Net Torque: 1.0 N.m (0.74 lbf-ft.) @ 5,000 RPM
- Idle Speed: 3,100 ± 200 RPM
- Max. No-Load RPM* (Requires Blade Barrier): 10,000 RPM
- Ignition System: Transistorized flywheel magneto (electronic)
- Spark Plug: CMR5H (NGK)
- Cooling System: Forced air
- Starting System: Recoil starter
- Stopping System: Ignition primary circuit ground
- Carburetor: Diaphragm type w/fuel pump
- Recommended Fuel: Regular unleaded gasoline (87 Octane)
- Fuel Primer: Anti-flood type
- Fuel Capacity: 0.5 L (17.6 fl. Imp. oz.)
- Fuel Consumption (approximate)**: 0.5 L/hr (0.11 Imp. gal./hr)
- Clutch Drive Type: Centrifugal Twin Shoe-Clutch
- Clutch Size: 54 mm (2.125 in.) Diameter
- Clutch Engagement: 4;200 ± 200 RPM
- Air Cleaner: Semi-dry type
- Lubrication System: Oil mist
- Oil Capacity: 80 cc (2.82 fl. Imp. oz.)
- Recommended Oil: SAE 10W30 API service classification SJ or later
- Overall Length With Cutter Mounted: 188.5 cm (74.2 in.)
- Overall Width: 34.5 cm (13.6 in.)
- Overall Height: 26.5 cm (10.4 in.)
- Dry Weight (Without Blade): 5.9 kg (13 lbs.)
- Handle Type: Loop
- Throttle Control Type: Two-motion trigger type
- Engine Stop Switch: Slide type switch
- Cutting Head (Standard): Semi-matic line feed nylon (tap-and-go)
- Cutting Head (Optional): Manual, pro-tap, semi-pro
- Cutting Width: 43.2 cm (17 in.)
- Line Type: Quiet LineTM
- Cutting Line Diameter: 2.41 mm (0.095 in.)
- Anti-Vibration System: Standard
- Drive Shaft Type: Flexible steel cable
- Final Drive Gear Case: Helical cut bevel gears / Sealed ball bearings
- Gear Ratio: 1.235 Input shaft: 1 (Output Shaft)
- Main Pipe Diameter: 25.4 mm (1 in.)
- Main Pipe Thickness / Material: 1.5 mm (0.06 in.) / Aluminum
- Trimmer Guard With Cutter: Standard
- Steel Blade Guard: Optional
- Shoulder Harness: Standard
- Professional Double Loop Harness: Optional†
- Safety Goggles (A.N.S.I Std.): Standard